Mods...

Ford Fusion 2013-2016 - Replace headlight bulbs without removing the front bumper!

Monday, 19 June 2017

Affraid to remove the front bumper on your Ford Fusion 2016... or just do not have the time for it? Well, here is a way... .

More...

Paiting your intercooler pipes and engine cover

Saturday, 20 May 2015

Got bored with the look of your engine bay? Paiting your charge pipes will bring a little bit of tasteful blig, if done properly. Paiting is quite a simple process that will mostly require patience and preparation beforehand.

More...

Motor mounts installation on 8th gen Civic Si

Tuesday, 03 September 2013

If you are adding more power to your engine, here is another mod that you might be interested in - "motor mounts" or "engine mounts".

More...

Installing LCA bushings on the 8th gen Si

Monday, 13 August 2012

After I finished installing my turbo, I started having problems with the wheel spin and especially with wheel hop when launching from a standstill (too much power :) in my little economo-box). Did a little bit of research and turns up that the best thing to do to eliminate wheel hop is installing better LCA bushings.

More...

Turbo setup on 8th gen Civic Si - k20 engines

Thursday, 24 May 2012

I finally had the time to put together an article about my turbo-charge set-up. Nothing fancy, but I though that if I share my experience, some of you might find it helpful...

More...

Installing extended studs on Caliber SRT4

Wednesday, 23 May 2012

Recently I have installed spacers and extended studs on my Caliber SRT4.
And since I haven't added new articles in this section for a while, I thought it will not be bad to share my experience with you guys :).

More...

Aftermarket seats for 8th generation Civic Si

Friday, 27 May 2011

If you are looking to shave some weight on your 8th generation civic, forget about replacing the hood. Replacing your stock seats, will help you loose much more weight.

More...

Acura TL-S Brembo calipers upgrade for 8th generation Civic Si

Friday, 27 May 2011

Need those BBK but don't really have the money to buy an expensive after market kit? Here is a solution...

More...

Bleeding your brakes

Friday, 27 May 2011

Some of you might not give too much importance to this, but when racing your car, bleeding the brakes must be part of your maintenance routine.
This is another nice way of saving a lot of money on the long run for all of you that enjoys a track day here and there.

More...

Changing brake pads and rotors

Friday, 13 May 2011

NotFor those of you that enjoy their car on the road and on the track and especially if you are running separate brake pads and rotors for the road and track, changing them is something that you might want to learn.
It will help you save A LOT of money!

More...